System Settings#
Important
When modifying the parameters on this page, scan “Start Setup” first, then scan the target Parameter Barcode; scan “End Setup” after completion.
Restore Factory Defaults#
Warning
Scanning this Parameter Barcode will restore the Barcode Reader to factory default settings. Please confirm that the current configuration has been recorded.
Restore Factory Defaults#
Prompt Output#
Buzzer prompt#
Buzzer prompts include power-on prompts and decoding success prompts.
Enable buzzer# |
*Disable buzzer# |
Voice prompt#
Prompt sounds include decoding success prompts, WeChat/Alipay voice broadcasts and power-on prompts.
*Enable voice prompts# |
Disable voice prompts# |
In particular, after disabling payment barcode voice, you can turn off WeChat and Alipay voice reminders.
Disable payment barcode voice#
After the payment barcode voice is disabled, there are two prompt methods for non-payment barcode voice: “Ding Dong” and “Scan code completed, start printing”. Select one of the two to take effect, which can be configured through the following Parameter Barcode.
Enable “Ding Dong” alerts# |
Enable the “Scan QR code completed, start printing” prompt# |
Volume settings#
Volume level 1# |
Volume Level 2# |
Volume level 3# |
Volume level 4# |
Volume level 5# |
Read Firmware Version#
Scan the following Parameter Barcode to output the current firmware version information.
Read Firmware Version#
Update firmware#
Update firmware#
Operation example#
Example |
Target |
Scan Order |
|---|---|---|
Function example 1 |
Enable buzzer prompts, disable voice prompts |
Start Setup -> Enable buzzer -> Disable voice prompts -> End Setup |
Function example 2 |
Enter presentation mode |
Start Setup -> Presentation Mode -> End Setup |