Interface Settings#
Important
When modifying the parameters on this page, scan “Start Setup” first, then scan the target Parameter Barcode; scan “End Setup” after completion.
Communication interface#
USB HID-KBW#
Switch to USB HID-KBW interface#
Inter-key Delay Settings#
The key-pressing time interval during continuous key-pressing operations on the virtual keyboard. The interval is from the last key release to the next key press. The inter-key delay setting range is 0~75ms, and the default inter-key delay is 2ms.
Default delay# |
no delay# |
short delay# |
long delay# |
USB Virtual COM Port#
When the Scan Engine uses the USB communication interface, but the host application uses serial communication to receive data, the Scan Engine can be set to the USB Virtual COM Port communication method. This feature requires the appropriate driver to be installed on the host machine.
Switch to USB Virtual COM Port#
USB HID-POS#
The USB HID-POS interface is recommended for new applications. Based on HID interface, no driver installation is required.
Switch to USB HID-POS interface#
serial#
Switch to serial port#
Baud Rate#
The unit of Baud Rate is bits per second (bps: bits per second). The optional configuration parameters are as follows.
1200# |
2400# |
4800# |
9600# |
14400# |
19200# |
38400# |
57600# |
115200# |